Cernit Varnish 30 ml Matt

Varnish especially made for the Cernit clay. This water-based varnish is totally clear after drying and once baked, it prevents any damage from hits or scratches. The varnish is waterproof.

Blend the varnish before using. The water-based varnish has to be applyed on a polymer clay which is baked and degreased with alcohol or the brush cleaner. It is used very easily with a thin bristled brush.

As soon as the clay is covered with varnish, the drying time has to be one hour. Drying time should be carefully watched between different layers. Your result will be perfect if you apply 2 or 3 layers.

Once it is dry to the touch, bake it once again at 110°C in the domestic and preheated oven during 15 minutes. Leave it to cool down during 48 hours to get the best possible hardness.

When you are done working with the varnish, material and brushes can be cleaned with water.

The matt varnish keeps the mat finish of the Cernit number one while protecting the clay. Damages will be prevented and irregularities such as finger marks will disappear. The Cernit varnish has flawless finish without any bubbles.