Laney GH50R Tube Amplifier
Product code: GH50R | ID: 232345
The GH50R is an EL34-loaded, twin channel, 50-watt ALL TUBE head capable of balancing the amount of pre-amp and power-amp distortion in your tone. GHR is the product of Laney’s long-term study of how guitar players interact with tube amps. “Tube tone” is composed with what we have come to describe as “Red” and “Black” tone elements: Red is tube preamp distortion, in which ECC83 tubes add drive. Black is output tube distortion which increases as the power tubes are driven harder. GHR allows the player to balance Red and Black elements to seek the sweet spot in each player’s setup.
The
result of intensive design and development in Great Britain, the GH50R
delivers 50 watts RMS of pure, rich, warm tube power from an EL34 loaded
output section. Both of the GH50R’s channels can be configured to be
used either clean or driven, with each channel producing subtle
differences in tone depending on how you tweak them. This is the ‘amp
tweaker’s’ delight! Whether its funk or melodic rock, whether you’re a
hybrid picker or a shredder, the GH50R delivers outstanding, dynamic,
complex, rich & colourful guitar tones. The GH50R’s unique Master
Output control allows you to dial in just the right balance of pre-amp
v’s power-amp distortion to find the sweet spot. A Master Tone control
also allows tonal adjustment at the end of signal chain. The 3 band tone
stack is shared between channels giving a simple yet effective tone
palette. A Pull Shift function also increases the tonal flexibility of
the mid-range. Studio-quality digital reverb gives rich ambience to the
sound via a rotary control. A Pull Focus function adds further variation
according to preference.
Specs
Cabinet Designrugged Plywood Cabinet With Two Colour Covering, Black Stringing, Comfortable Top Edge Bar Handles
Channels 2
Channel Controlschannel 1 - Drive. Channel 2 Drive And Volume
Classclass A/B
DI Socketbalanced DI Output Post Output Section With Speaker Emulation
Equalisation Passive Bass, Middle (Pull Shift), Treble & Master Tone
Footswitch Fs2 Included
Fx Loop(S)(Series/switchable Level)
Inputs 1 X Jack Input
Output Valves 2 X EL34
Power 50 Watts RMS
Preamp Valves 4 X 12ax7
Reverb Yes - High Quality Digital Reverb With Pull Focus
Speaker Connections1 X 16 Ohm, 1 X 8 Ohm, 2 X 16 Ohms, 1 X 4 Ohms & 2 X 8 Ohms
Unit Dims - For Int. Case (HxW2xD Mm) 250 X 675 X 285
Weight Unit 17.5kg, Packed 19,5kg
Bright Switch Channel 1 - Pull Bright
Cabinet Emulation Cabinet Emulated Post Output Section Di Out
Cover Supplied With Custom Embroidered Slip Cover
Ground Lift Yes
Master Section Master Tone, Master Output
Mp3 Inputyes - Mini Jack
Number of Channels
Controls
External FX Loop
Number of Input Ports
MIDI Interface
Rackmountable
Type of Electronics in the Power Amplifier
Impedance
Power
Power (Watt)
Headphone Output
MP3 / Line In
Footswitch Input Port
USB
DI Output
Connection for External Speaker
Power Supply
Made in
China