MOOG Werkstatt-01
Product code: WERKSTATT-01 | ID: 223434
Modular analog synthesizer with one oscillator. Moog Werkstatt lets any musician built his own synthesizer without any electronics experience. Originally a project for MoogFest 2014 workshop, due to high demand released through a selected group of dealers. Synthesizer is equipped with a classic Moog 4-pole ladder filter, oscillator with a frequency range of 8 – 16 000 Hz, envelope filter with various modulation effects and a 13 - button keyboard. Powered by a 12 V included adaptor. Finished in black color.
OSCILLATOR SECTION
• Single VCO w/ frequency control (8Hz to 16KHz)
• Saw and square waveshapes w/ control for square pulse width
• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
• Ability to PWM the square wave
FILTER SECTION
• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
• Select between the Envelope generator and LFO as Mod Source.
• Polarity switch (+/-) and amount knob for control of filter cutoff modulation
LFO SECTION
• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)
VCA/AMP SECTION
• Select between the Envelope Generator or ON (Drone)
ENVELOPES SECTION
• Controls for Attack & Decay time w/ Sustain On/Off switch
KB SECTION
• One octave low-note priority legato keyboard w/ glide control
PATCHBAY
• VCA Input0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode
• VCF Input-5V to +5
• VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input
• VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable
• LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel
• VCF AUDIO InputUnbuffered/Unmixed AC coupled input to VCF
• 2x KB CV Output3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
• 2x TRIG Output 5 msec pulse, 0 to +5 V signal generated from low-note priority
• 2x GATE Output0 to +5V signal generated from low-note priority
• 2x EG Output0 to +5V signal, Simple ASD or AD type Envelope Generator
• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch
• 2x VCF Output-2V to +2 V signal for audio or CV uses
• 2x VCO Output0V to +5V VCO signal, wave selected by VCO Wave Switch
Rear Panel
• AUDIO Output Nominal +/-1.5V Signal
• POWER+12VDC Center Positive w/ 1.2A Wall transformer
• POWER CONSUMPTION 1.8 Watt AVG
Polyphony
Power Supply
240V
UK/EU Power supply included
Made in
China