The CR 2600 series rack enclouseres are designed to hold all RCF 19" rack standard components. The rack enclosures are bake-painted at high temperature using epoxy powders to make the structure unalterable over timeand resistant to scratching, abrasion, and atmospheric agents. The CR 2600 SERIES rack enclosures are composed of a basic structure that is assembled simply and quickly by fitting and securing four steel uprights to the upper and lower panels.FeaturesConstructed in compliance with the IEC 297-2 dimensional standardThe structure is made of steel painted RAL 7035 light greyThe protection level is IP 30The lower door and side panels are fitted following the wiring operations to facilitate the insertion and connection of the componentsThe earthing of the rack complies with current safety regulationsFront doors are also available, which are useful for to protect the components installed in the rack3 blowers turn on due to the activation command of a thermostat includedGeneral SpecificationsType: 19" Rack cabinetUnit: 28 UMax load: 320 / 705.46 Kg/LbsThermal Dissipation 25 °C: 3280 WThermal Dissipation 35 °C: 2160 WColour: RAL 7035Protection level: IP 30Air flow volume ventilation kit: 300 m3/hDoor SectionModel: AK 2628 (Code 173.60.029)Type: Frontal door with safety glassWeight: 14 / 30.86 Kg/LbsPhysical SpecificationsHeight: 1600 / 62.99 mm/inchWidth: 600 / 23.62 mm/inchDepth: 600 / 23.62 mm/inchNet Weight: 54 / 119.05 Kg/Lbs.